Tripods

• Load Capacity: 15kg
• Weight: 3.7kg
• Pan and tilt dampening adjustment
• Removable 75mm half ball with quick release handle
• 3/8″ mount for use on flat mount sliders or tripods
• 7 Steps of counterbalance
• -70 to + 90 degree tilting
• Drop in quick mount and release video plate with lever lock
• 1/4″-20 and 3/8″-16 Accessory Sockets
• Dual handle operation

• Easy replacement with the SR mounting tray
• Mounting tool integrated in the weight hook
• Reversible for overhead shooting
• For cameras and equipment with 1/4" or 3/8" thread
• Fixing screw in the mounting plate

• Easy mounting - just screw it onto the tripod and you are ready to go
• No tools necessary
• Tripod connection 3/8"
• Head connection 1/4" or 3/8"
• Reversible head connection screw 1/4" or 3/8"
• mounting plates top and bottom: ø 49mm
• Fixing screw for mounting plate top

• Lightweight and portable carbon fiber tripod for hiking and outdoor photography.
• Maximum height of 59.8 inches, compactly folds to 13.9 inches for easy transport.
• Quick setup with 5-section twist-and-pull carbon fiber legs.
• Removable and reversible center column for low perspective and macro photography.
• Center column converts to a short column for added low-perspective options.
• Versatile B-00K ball head with Arca-type quick release plate.
• Compatible with DSLRs, compact cameras, video cameras, mirrorless cameras, and cell phones (with adapter).

• Lightweight and portable carbon fiber tripod ideal for hiking and outdoor photography.
• Maximum height of 60.6 inches, yet folds down to a compact 13.9 inches for easy transport.
• Quick and easy setup with 5-section twist-and-pull carbon fiber legs.
• Removable and reversible center column for low perspective and macro photography.
• Center column also converts into a short version for additional low-perspective options.
• Versatile E-10 ball head with Arca-type quick release plate.
• Compatible with DSLRs, compact cameras, video cameras, mirrorless cameras, and cell phones (with adapter).

• Reverse-Folding Legs
• One Leg Converts to 69.7" Monopod
• Split Center Column
• Stainless Steel Spikes and Rubber Feet
• Payload: 6.6 lb
• Fluid System for Smooth Pans and Tilts
• Spring-Assisted Counterbalance
• TY-70A Quick-Release Plate
• Dual Safety Lock System
• 2 Bubble Levels
• For DSLRs or compact video cameras up to 6.6 lb
• Fluid system for smooth pan and tilts
• Internal spring-loaded counterbalance mechanism
• Quick-release plate with forward/backward adjustment
• Dual safety lock system prevents plate from slipping off head
• Two bubble levels: one at base of head, one a top of head
• Accepts SIRUI TY-50/60/70/70-2 and LP-40/75 and many Arca-compatible quick release plates

• Waterproof leg design protects your tripod from water damage.
• Ergonomic leg Angle Locks for fast adjustment – even with wet or gloved hands.
• Leg converts into a waterproof monopod. Center column can be attached for increased height.
• Legs fold up 180° for extra compactness.
• Bubble Level for fast horizontal alignment.
• For speed and convenience, each leg has an automatic leg angle lock mechanism.
• Split center column makes changing from standard center column to short center column fast and easy.
• 3 leg angle positions for uneven terrain.
• Slip-resistant rubber feet can be replaced with stainless steel spiked spikes (included).
• Hook under the center column can hold a weight bag for added stability.

• 4-section, 10-layer carbon fiber tripod with a robust 39.7 lb load capacity.
• Max height of 74.9" when fully extended, and 10.1" when lowered to the ground.
• Compact 20.5" folded size with 180° reverse-folding legs.
• Waterproof leg design for use in water or rainy conditions without damage.
• Convertible into a monopod, and the center column can supplement monopod height.
• Aluminum K20X ball head with separate locking knobs for pan and ball movement.
• Tension control ring for adjusting ball drag.
• Three bubble levels for precise leveling on all axes.
• Includes TY-50X quick release plate for convenience.

• Waterproof Sealing System for protection against water, dust, and particles.
• Maximum height of 70.9" and a robust 39.7 lb load capacity.
• Lightweight at 4.6 lb for easy portability.
• Convenient reverse-folding legs that reduce the folded size to 20.5".
• 4-section legs with twist locks for individual adjustment.
• Transformable into a 69.7" monopod using a removable leg.
• Versatile stability with removable rubber feet or stainless-steel spikes.
• Split center column for a minimum height of 6.1".
• Ballast hook on the center column for additional stability.
• Arca-type quick release clamp with secondary safety lock
• Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
• The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
• Quick release plate is aluminum alloy with a rubberized surface
• Stainless steel camera screw

• K-10 II ball head includes Arca-type quick release plate
• Removable, reversible center column for inverted shooting
• Includes long and short center column
• Center column and removable leg convert to monopod
• Ballast hook for added stability
• 1/4"-20 accessory mount
• Independent leg spread, multiple locking angles
• Leg warmers on two legs for easy handling and protection
• Includes steel foot spike set for use on slick surfaces

• E-10 ball head includes Arca-type quick release plate
• Removable, reversible center column for inverted shooting
• Includes long and short center column
• Center column and removable leg convert to monopod
• Ballast hook for added stability
• 1/4"-20 accessory mount
• Independent leg spread, multiple locking angles
• Leg warmers on two legs for easy handling and protection
• Includes steel foot spike set for use on slick surfaces

• K-10 II ball head includes Arca-type quick release plate
• Removable, reversible center column for inverted shooting
• Includes long and short center column
• Center column and removable leg convert to monopod
• Ballast hook for added stability
• 1/4"-20 accessory mount
• Independent leg spread, multiple locking angles
• Leg warmers on two legs for easy handling and protection
• Includes steel foot spike set for use on slick surfaces

• E-10 ball head includes Arca-type quick release plate
• Removable, reversible center column for inverted shooting
• Includes long and short center column
• Center column and removable leg convert to monopod
• Ballast hook for added stability
• 1/4"-20 accessory mount
• Independent leg spread, multiple locking angles
• Leg warmers on two legs for easy handling and protection
• Includes steel foot spike set for use on slick surfaces

T004SK+VA5/T024SK+VA5

• 4-stage tripod extends from 5.5 to 55.1" high
• Center column reverses for low-angle or macro shots
• 2-piece center column
• Twist leg locks
• Three selectable leg angles
• Lightweight yet durable anodized aluminum construction
• Sturdy magnesium leg sockets
• Foam padding on legs for comfort
• Rubber tripod feet
• T-024SK tripod with padded four-section legs and a VA-5 fluid head
• Load capacity of 6.6 lb, 3 lb tripod weight, maximum height of 58.7", and minimum height of 5.5"
• Twist leg locks and removable center column
• TY-70A quick release plate with 1/4"-20 and 3/8"-16 mounting screws
• Supports compact video, mirrorless, or DSLR cameras up to 6.6 lb
• Fluid system for smooth pan and tilts
• Spring-loaded 2.2 lb counterbalance mechanism
• Quick release plate with sliding adjustment
• Safety lock prevents plate from slipping off the head
• Two bubble levels: one at base of the head and one on top
• Arca-compatible quick release plate

Sirui R2004 Aluminum Tripod

• Lightweight 4-section design.
• Twist-leg lock system for quick adjustments.
• Maximum height of 64.2" and minimum height of 15.2".
• Reversible center column for low-angle shots.
• Compact foldable design at 20.7" length.
• Rubber feet with stainless-steel spikes for stability.

Sirui R2204 Carbon Fiber Tripod

• Ultralight 4-section carbon fiber construction.
• Twist-leg lock system for easy setup.
• Maximum height of 64.2" and minimum height of 15.2".
• Reversible center column for macro photography.
• Compact foldable design at 20.7" length.
• Rubber feet with stainless-steel spikes for added stability.

Sirui E-20 Ball Head with TY-50E Plate

• Arca-type compatible ball head with safety stop and security pin release button
• 360° panning base with 5° scale increments
• Integrated spirit bubble level for balancing
• Machined eyelet on the quick release place for a hand or shoulder strap

ET1004+VA5, ET2004+E20

• Best quality aluminum in 4 sections
• Reversible 1/4" and 3/8" screw for tripod heads or camera
• Fixation screw for tripod head
• Legs can be folded upwards by 180°
• Practical folding locks for a firm hold
• Stabilizing hooks and cold protection handles

ET1204+E10,ET2204+VA5

• Carbon 8x carbon fiber in 4 sections
• Reversible 1/4" and 3/8" screw for tripod heads or camera
• Fixation screw for tripod head
• Legs fold 180° upwards
• Convenient folding locks for a firm hold
• Stabilizing hooks and cold protection handles
• Rubber feet with metal spikes that can be unscrewed

VA5 Head

• Sophisticated fluid system ensures smooth jerk-free movements
• Safety Lock System - prevents plate slipping
• 360° panoramic rotation, infinitely variable
• Tilt and rotate function can be fixed
• Two leveling bubbles for perfect alignment
• Rubberized swivel arm 23cm long
• Tripod connection: 3/8" thread
• Interchangeable plate TY-70A: 1/4" + 3/8" screw

• Lightweight and portable design.
• Flip leg locks for quick and secure setup.
• E-10/20 Ball Head for smooth and precise camera positioning.
• Available in different sizes for various height requirements.
• Durable construction for long-lasting use.
• Easy to carry during travel with a compact form factor.
• Adjustable leg angles for versatile shooting angles.
• Rubberized feet for stability on various surfaces.
• Included carrying case for convenient storage and transport.
• Ideal for both beginners and experienced photographers.

A1005Y

• The 2.7 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb
• The aluminum legs have 5-sections and the legs fold in reverse to a compact 14"
• Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
• The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
• The Y-10 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera

A1205Y

• The 2.2 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb
• The 8x carbon fiber legs have 5-sections and the legs fold in reverse to a compact 14.6"
• Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
• The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
• The Y-11 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera

• Compact mini tripod with ball head and remote control
• Incl. Bluetooth® receiver (dongle) for (Sony) cameras without native Bluetooth® function
• Remote control detachable for camera control from up to 10m distance
• Folded legs can also be used as handle
• High-quality metal ball head for extra strong hold
• Safety Lock System against accidental slipping. Safety Lock System against accidental slipping of the camera
• Non-slip feet with rubber coating
• 1/4" accessory connection for flex arms or microphone
• Head and camera plate made of best quality aluminium
• Tripod legs made of light and robust plastic

• best quality aluminium
• 10cm long feet can be folded up or down 180°, rubberized at the ends
• centre column can be extended or removed by 8,5cm via telescopic extension
• second additional centre column without extension included
• reversible 1/4" & 3/8" screw for tripod heads or camera

• Geared center column with locking collar
• Center column crank folds for easy storage
• Independent leg spread
• Three locking leg angles
• Legs feature graduated scales
• Padded leg covers for improved grip
• Reversible 3/8"-16 to 1/4"-20 head mount
• Bubble level
• Included 3-spiked foot set

• Carbon carbon fiber in 4 sections
• Mounting plate fixed or 15° and 75 mm adapter half shell
• 3/8" screw for tripod heads, camera or camcorder
• 3 lockable leg angles
• Lower leg segment with adjustment scale
• 1/4" accessory connection for articulated arm, microphone, etc.
• Half a turn is enough to release the leg segments
• Protective handles for a secure grip in cold and heat
• Stabilizing hook and leveling bubble
• Rubber feet and metal spikes

W2004

• Monopod integrated
• Aluminium in 4 sections
• Reversible 1/4 inch and 3/8 inch screw for heads/cameras
• Fixing screw for tripod head
• Legs can be folded upwards by 180°
• Twist locks water- and dustproof (up to upper edge of cold protection handles)
• Stabilizing hooks and cold protection handles

W2204

• Monopod integrated
• 10x carbon fiber in 4 sections
• Reversible 1/4 inch and 3/8 inch screw for heads/cameras
• Fixation screw for tripod head
• Legs can be folded upwards by 180°
• Twist locks water- and dustproof (up to upper edge of cold protection handles)
• Stabilizing hook and cold protection handles